System Requirements; Connecting Your Machine And Smart Device - ResMed AirMini Patient Manual

To install the software update:
1. Tap Update app.
You will be redirected to the Google Play™ store to download the Galaxy™ version of the AirMini
app software update.
2. Follow any additional on-screen prompts to complete the update process.

System requirements

Refer to ResMed.com/AirMini app for a list of smart devices compatible with the AirMini app.
In addition, Android operating system version 4.4 (minimum) is required.

Connecting your machine and smart device

1. Ensure that your machine is set up correctly and plugged into a power source.
Refer to your AirMini user guide for additional information on setup.
2. On your smart device, enable Bluetooth.
Refer to your smart device user guide for instructions on enabling Bluetooth.
3. Open the AirMini app and follow the on-screen prompts to pair with your AirMini machine.
4. On your machine, press the Bluetooth button
When the light starts to flash blue , Bluetooth is enabled on your AirMini machine and ready to
connect.
5. On your smart device, tap Connect.
When your AirMini machine is discovered, the machine name appears in the machine selection
list.
6. Select the machine name from the list to connect.
7. The first time you open the AirMini app, you will be asked to consent to the use of cookies and to
accept ResMed's Terms and Conditions and Privacy Policy.
Check the boxes on the Welcome screen and then tap Continue.
8. The first time you pair your AirMini machine with your smart device, you will need to perform the
authentication procedure.
When prompted by the AirMini app, authenticate by entering the four-digit key located on the back
of your machine.
Alternatively, you can tap Scan code, and the AirMini app will prompt you to allow the use of your
device's camera and then to position the machine's QR code within the camera's viewing frame.
Note: The QR code is located on the back of your AirMini machine.
9. Tap Continue.
4
when prompted by the AirMini app.