Technical Specifications; System Requirements; Device, Pulse Oximeter And Effort Sensor - ResMed ApneaLink Air Clinical Manual

Technical specifications

System requirements

Software
The ApneaLink software is compatible with the following operating systems:
Microsoft Windows XP
•
Microsoft Windows Vista (32 bit and 64 bit versions)
•
Microsoft Windows 7 (32 bit and 64 bit versions)
•
Microsoft Windows 8 (32 bit and 64 bit versions)
•
Adobe Reader version 8.0 and higher
•
Note: Local administrator rights are required for installation.
Hardware
For operation of the ApneaLink software the following minimum hardware
configuration is required:
Intel Core 2 processor or similar
•
512 MB RAM
•
USB high speed port
•
CD-ROM drive
•
Screen resolution 800x600 pixel, high color (16 bit)
•

Device, pulse oximeter and effort sensor

Signal recording
Sampling rates for the
channels
Recording time
Power supply
Weight
60
Respiratory flow
Respiratory effort
Blood oxygen saturation
Pulse
Battery voltage
• Respiratory flow: 100 Hz
• Respiratory effort: 10 Hz
• Blood oxygen saturation (SpO
• Pulse: 1 Hz
• Battery: 1Hz
4 x 12 hours
Two NiMH rechargeable batteries (Micro/AAA/HR03/1.2 V/
min. 1000 mAh) or
Two batteries (Micro/AAA/LR03/1.5 V/min. 1000 mAh).
Recorder: Approx. 2.4 oz (66 g) without rechargeable
batteries or batteries
Pulse Oximeter: approx. 1.1 oz (30 g)
): 1 Hz
2