Further Information - ResMed AirMini Patient Manual

Problem/possible cause
I am experiencing dryness or have a dry or blocked nose.
Your mask may be fitted incorrectly.
Humidification may be required.
I am using the HumidX or HumidX Plus and am getting uncomfortable droplets of water on my nose, mask or air
tubing.
The humidity level is too high.
Note: you may need to use the HumidX or HumidX Plus when ambient humidity conditions change.
Displayed values
Value
Pressure sensor at air outlet:
Mask pressure
To see additional information about your machine or the AirMini app (for example, the software
version of the app), go to the More menu in the Navigation drawer.

Further information

For information on cleaning your machine, maintenance, troubleshooting and other technical
specifications, refer to your AirMini machine user guide.
Solution
Adjust and refit your mask to improve the seal. Ensure that no
air is leaking from it. Refer to your mask user guide for fitting
instructions or perform the mask fit function using the AirMini
app to check your mask fit and seal. If your mask fit is good,
try the HumidX Plus.
Try therapy using the HumidX.
If you are using the HumidX, remove it and try therapy
without humidification.
If you are using the HumidX Plus, try the HumidX instead. This
will help to reduce the water droplets.
If you still experience problems, contact your provider.
Range
4–20 cm H 0 (4–20 hPa)
2
Display resolution
0.1 cm H O (0.1 hPa)
2
English 13