Removing The Start Number Plate; Installing The Start Number Plate; Removing The Front Fender - Husqvarna TC 85 2017 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.14

Removing the start number plate

11.15

Installing the start number plate

11.16

Removing the front fender

–
Take brake line
–
Remove screw
M00315-11
–
Position the start number plate. Mount and tighten screw
Guideline
Start number plate screw
The holding lugs engage.
–
Position brake line
M00315-10
Preparatory work
–
Remove the start number plate. (
Main work
–
Remove screws
C00641-11

out of the brake line guide.

. Take off the start number plate.

in the brake line guide.
p. 39)
 
and . Remove the front fender.

.
M6 4 Nm (3 lbf ft)
39