Assigning Pair Signals To Cross-Point Buttons - Sony MVS-6500 System Startup Manual

Keyboard window
d Press [Enter].
e Repeat steps 1 to 4 as required to assign other
signals.
Notes
Up to 16 characters can be entered for signal names.
Memo
You can also set the color for cross-point buttons
assigned with signals.
Assigning Pair Signals to Cross-
Point Buttons
You can assign video and key signals, shown below, as a
pair to each cross-point button.
Video signal
1
Display the menu.
a Open the Engineering Setup >Panel >Xpt Assign
menu (7322).
b Press [Main, V/K Pair Assign].
The Main, V/K Pair Assign menu (7322.5) appears.
22
Assigning Signals to Cross-Point Buttons
2
Assign a video signal to the cross-point button.
Enter
a In the [V/K] column of the list on the left, select the
b In the <Assign> group, press [Video], turning it on.
c In the list on the right, select the signal you want to
d In the <Xpt Assign> group, press [Set].
3
Assign a key signal to the cross-point button.
a In the <Assign> group, press [Key], turning it on.
b In the list on the right, select the signal you want to
c In the <Xpt Assign> group, press [Set].
• In the <Assign> group, you can press [Video] and
Key signal
• You can also edit the lists using [Insert] and [Delete]
4
Repeat steps 2 and 3 as required to assign other
signals.
For details about using assigned pair signals using a
keyer, see "Entering Titles using Luminance Keys"
(1 p. 51).
V/K
Video Key Set
Main, V/K Pair Assign menu
number of the cross-point button.
In this example, select "1".
assign as the video signal.
In this example, select "CAM1".
The video is assigned.
assign as the key signal.
In this example, select "Key1".
The key is assigned.
Memo
[Key], turning them both on, to assign signals at the
same time.
in the <Xpt Assign> group.