This section describes the procedure for operations for the
"Setup" data file.
Memo
You can save register data containing snapshots,
keyframes, macros and other data on a removable disk and
then recall that data.
For details about operation, refer to the User's Guide.
1
Prepare a removable disk.
For details about configuring a removable disk for use
in the MVS system, see "Setting Up a Removable Disk
for Use" (1 p. 39).
2
Display the menu.
a Open the File >Setup, Init, KMem >Setup menu
(7111).
Memo
For operations for the "Initial Status" data file, open
the File >Setup, Init, KMem >Initial Status menu
(7112).
3
Select the target device.
Device selection area
T Load
a In the device selection area on the left, select
[Register].
b In the device selection area on the right, select
[Removable Disk] and then select [SYSTEM]
(default directory).
Memo
You can also create an arbitrary directory on the
removable disk.
40
Saving Data to Removable Disk
t Save
Setup menu
4
Execute a save or recall operation.
To save data
a Press [t Save].
To recall data
a In the [Removable Disk] list on the right, select the
file you want to recall.
b Press [T Load].