Table of Contents
Advertisement
Electrical system
Delete times
This option deletes the stored chronometer times.
A deletion confirmation is requested. Once the op-
eration is finished, the display goes back to the
CHRONOMETER menu.
Operation
To use the chronometer, the display should show
the main menu with the word CHRONO, waiting
for the count to start. Press the MODE selector at
the central position for a couple of seconds and the
chronometer starts to time. Press the MODE se-
lector at the central position again within 10 sec-
onds of the start to cancel the timing operation and
to begin a new measurement.
Press the MODE selector at the central position
again within 10 seconds of the start to stop the op-
eration, store the time and begin a new measure-
ment. The series of measurements is interrupted
by pressing and holding down the MODE selector
at the central position.
After storing 40 times, this function is over and the
word "FULL" is displayed: in order to read the
chronometer times it is necessary to stop the mo-
torbike and display the VIEW TIMES function of
the CHRONOMETER menu. It is possible to carry
out a new measurement only after all the stored
times have been deleted: select the DELETE
TIMES function of the CHRONOMETER menu.
LANGUAGES
Select the user's interface language from this
menu:
•
ITALIANO
•
ENGLISH
•
FRANCAIS
•
DEUTSCH
•
ESPAGNOL
SERVICE THRESHOLD
ELE SYS - 44
PEGASO 650 STRADA - TRAIL - FACTORY
Advertisement
Table of Contents
