Mute Mode - Shure ULX-D Dual Manual

Shure Incorporated
ULX-D Dual and Quad Z16-20 ULX-D Digital Wireless Microphone System
LOCK
Sets the lock options: KEEP, Power, Menu, All, None
RF POWER
Sets the transmitter RF power level: KEEP, 10mW=Nm, 1mW=Lo, 20mW=Hi.
BATT
Sets the transmitter battery type to ensure accurate metering: KEEP, Alkaline, NiMH, Lithium
BP OFFSET
Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments
HH OFFSET
Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments

MUTE MODE

Configures the transmitter power switch to act as an audio mute switch.
Cust. Group
Create Custom Groups of up to 6 frequencies and export to networked receivers
GOOSENECK / BOUNDARY
HIGH PASS
Attenuates frequencies below 150 Hz by 12 dB per octave: KEEP, OFF, ON
RF POWER
Sets the transmitter RF power level: KEEP, 10mW=Nm, 1mW=Lo, 20mW=Hi
BATTERY
Sets the transmitter battery type to ensure accurate metering: KEEP, Alkaline, NiMH, Lithium
BN OFFSET
Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments
GN OFFSET
Adjustable gain to compensate for signal level difference between transmitters: KEEP, 0 to 21 dB in 3 dB increments
POWER LOCK
Locks the transmitter's power button: KEEP, OFF, ON
Cust. Group
Create Custom Groups of up to 6 frequencies and export to networked receivers
INITIAL STATE FROM CHARGER
Choose the transmitter's state after it is removed from a charger: KEEP, Active, Muted, OFF
MUTE BUTTON BEHAVIOR
Sets the mute button behavior: KEEP, Toggle, Push-to-Talk, Push-to-Mute, Disabled
BN MUTE LED ACTIVE/MUTE
Sets the mute LED colors for active and muted states: KEEP, Green/Red, Red/OFF, Red/Flash-Red, OFF/OFF
GN MUTE LED ACTIVE/MUTE
Sets the mute LED colors for active and muted states: KEEP, Green/Red, Red/OFF, Red/Flash-Red, OFF/OFF
MUTE LED LIGHT BRIGHTNESS
Sets the mute LED brightness: KEEP, Normal, Low
2017/06/09 13/45