ULX-D Dual and Quad Z16-20
ULX-D
SYSTEM RESET
•
RESTORE: Default Settings, Presets
•
SAVE: Create New Preset
•
DELETE: Delete Preset
VERSION
•
Model
•
Band
•
S/N (serial number)
•
Ver
•
Mcu
•
FPGA
•
Boot
Transmitter IR Presets
Use the IR PRESETS receiver menu to quickly configure transmitter settings
from the receiver screen. When a sync is performed between the receiver
and transmitter, the IR PRESETs automatically configure the transmitter.
Each parameter has the default value KEEP, which leaves that setting unaf-
fected by a sync.
Feature
BP PAD
LOCK
10mW=Nm (normal), 1mW=Lo (low), 20mW=Hi
RF POWER
BATT
BP OFFSET
HH OFFSET
MUTE MODE
Cust. Group
Batteries
2017/06/09
Digital Wireless Microphone System
Setting
+0 dB, -12 dB
Power, Menu, All, None
(high)
Alkaline, NiMH, Lithium
0 dB to +21 dB (in 3 dB increments)
0 dB to +21 dB (in 3 dB increments)
OFF, ON
OFF, ON
Note: When Cust. Groups is set to on, it may take up to 30 seconds to
complete an IR sync.
Creating a System Preset
System Presets allow a current receiver setup to be saved and restored.
Presets store all receiver settings to provide a quick way to configure a re-
ceiver or switch between several different setups. Up to 4 presets can be
stored in receiver memory.
To save the current receiver setup as a new preset: DEVICE UTILITIES>SYS-
TEM RESET>SAVE>CREATE NEW PRESET
Use the control wheel to name the preset, and then press Enter to save.
To recall a saved preset: DEVICE UTILITIES>SYSTEM RESET>RESTORE
Use the control wheel to select the preset name, and then press Enter.
Shure Incorporated
15/45