Mercedes-Benz C-CLASS Operator's Manual page 322

Hide thumbs Also See for C-CLASS:
Table of Contents

Advertisement

Jump-starting
320
starting characteristics can be impaired, particularly at low temperatures. Have the thawed-out
battery checked at a qualified specialist workshop.
All vehicles:
!
Vehicles with a gasoline engine: avoid repeated and lengthy starting attempts. Otherwise, the
catalytic converter could be damaged by non-combusted fuel.
Do not start the vehicle using a rapid charging device. If your vehicle's battery is discharged, the
engine can be jump-started from another vehicle or from a second battery using jumper cables.
Observe the following points:
The battery is not accessible in all vehicles. If the other vehicle's battery is not accessible, jump-
R
start the vehicle using a second battery or a jump-starting device.
Vehicles with a gasoline engine: only jump-start the vehicle when the engine and exhaust
R
system are cold.
All vehicles except vehicles with a lithium-ion battery: do not start the engine if the battery
R
is frozen. Let the battery thaw first.
Jump-starting may be performed only using batteries with a nominal voltage of 12 V.
R
Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.
R
If the battery is fully discharged, leave the battery that is being used to jump-start connected for
R
a few minutes before attempting to start. This charges the battery slightly.
Make sure that the two vehicles do not touch.
R
Make sure that:
the jumper cables are not damaged.
R
when the jumper cables are connected to the battery, uninsulated sections of the terminal clamp
R
do not come into contact with other metal sections.
the jumper cables cannot come into contact with parts which can move when the engine is
R
running, such as the V-belt pulley or the fan.
Secure the vehicle by applying the electric parking brake.
X
Shift the transmission to position P.
X
Make sure that the ignition is switched off. All indicator lamps in the instrument cluster must be
X
off. When using the SmartKey, turn the SmartKey to position 0 in the ignition lock and remove it
(
page 135).
Y
Switch off all electrical consumers, e.g. rear window defroster, lighting, etc.
X
Open the hood.
X

Advertisement

Table of Contents
loading

Table of Contents