Mercedes-Benz C-CLASS Operator's Manual page 120

Replacing bulbs
118
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it clock-
X
wise.
Turn signals
Remove the cover in the front wheel housing
X
( page 118).
Y
Turn housing cover : counter-clockwise and
X
remove it.
Turn bulb holder ; counter-clockwise,
X
unlock and remove it.
Pull defective bulb out of bulb holder ;.
X
Insert new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover :, turn it to the right
X
and lock it.
Replace the cover in the front wheel housing
X
( page 118).
Y
Removing and installing the cover in the
front wheel housing
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : 180° outwards until it
X
stops using a suitable object.
Cover ; is released.
Fold cover ; upwards.
X
To install: insert cover ; into the left, right
X
and two lower catches.
Turn rotary knob : 180° inwards until it
X
stops using a suitable object.
Cover ; is locked.
Replacing rear bulbs
Opening and closing the side trim pan-
els
Example: right-hand side paneling
You must open the side trim panel in the trunk
before you can replace the bulbs in the tail
lamps.
To open: release right or left side trim
X
panel : at the top and fold it down in the
direction of the arrow.
To close: insert side trim panel :.
X
Rear lamp cluster
Switch off the lights.
X
Open the trunk.
X
Open the side trim panel (
X
page 118).
Y