Mercedes-Benz C-CLASS Operator's Manual page 223

Using : or 9, select the
X
Running Lights function.
If the Daytime Running Lights
been switched on, the multifunction display
shows the cone of light and the W symbol
in yellow.
Press the a button to save the setting.
X
Further information on daytime running
lampsDaytime Running Lights
Instrument cluster submenu
Selecting the distance unit
The Display Unit Speed-/Odometer
allows you to choose whether certain displays
appear in kilometers or miles in the multifunc-
tion display.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Cluster submenu.
Press a to confirm.
X
Press : or 9 to select the
X
Unit Speed-/Odometer
The current setting km
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
Digital speedometer in the
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Range
R
Navigation instructions in the
R
Cruise control
R
DISTRONIC PLUS with Steering Assist and
R
Stop&Go Pilot
ASSYST PLUS service interval display
R
Switching the additional speedometer
on/off
If the additional speedometer is switched on,
the speed is shown in the status bar in the mul-
tifunction display instead of the outside tem-
perature.
Daytime
function has
( page 112).
Y
function
menu.
Instrument
Display
function.
or Miles appears.
Trip menu
Navi menu
Menus and submenus
The speed display is inverse to the speedome-
ter.
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Cluster submenu.
Press a to confirm.
X
Using : or 9, select the
X
Speedometer [km/h]
The current selection appears.
To activate/deactivate: press the a but-
X
ton again.
Restoring the factory settings
Press the ò button on the steering wheel
X
to open the menu list.
Press the : or 9 button on the steering
X
wheel to select the Settings
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
Settings submenu.
Press a to confirm.
X
The Reset All Settings?
appears.
Press : or 9 to select
X
Press a to confirm the selection.
X
If you have selected Yes, the multifunction
display shows a confirmation message.
For safety reasons, the
Lights function in the
reset when the vehicle is stationary.
menu.
Instrument
Additional
function.
menu.
Factory
function
No or Yes.
Daytime Running
Lights submenu is only
Z
221