What to do in an emergency
ROAD WARNING
Hazard warning flasher
■
Type A
■
Type B
■
Type C
6
2
The hazard warning flasher serves
as a warning to other drivers to exer-
cise
extreme
approaching, overtaking, or passing
your vehicle.
It should be used whenever emer-
gency repairs are being made or
when the vehicle is stopped near the
edge of a roadway.
Depress the flasher switch with the
ODM042242
ignition switch in any position. The
flasher switch is located in the center
console switch panel. All turn signal
lights will flash simultaneously.
ODM042243
ONC047620L
When you must make such an emer-
gency stop, always pull off the road
caution
when
as far as possible.
• The hazard warning flasher oper-
ates whether your vehicle is run-
ning or not.
• The turn signals do not work when
the hazard flasher is on.
• Care must be taken when using
the hazard warning flasher while
the vehicle is being towed.
• To turn the hazard warning lights
off, push the switch again.