Configuration Sheets; Planning The Type Of Application, Configuration Overview; Planning The Detector Line, Configuration Overview - Siemens FDCIO223 Technical Manual

Annex
9

Configuration sheets

9.2 Configuration sheets

9.2.1 Planning the type of application, configuration overview

Mounting site
Mode of mounting
Configuration of input/output 'I/O 1'
Configuration of input/output 'I/O 2'
Ground fault monitoring for both
inputs/outputs (jointly)

9.2.2 Planning the detector line, configuration overview

Parameters Input/output 'I/O 1'
Detector line Collective detector line
type
Collective detector line for potentially
explosive atmospheres
Conventional detector line
Alarm No
verification
Yes => alarm verification time = _____s
End-of-line EOL22(Ex); obligatory in Ex area
Transzorb diode 20 V ±5 %, 1.5 kW pulse
power
68 | 72
Building Technologies
Fire Safety
________________
On DIN rail TS35 in a cabinet / control panel housing
With housing FDCH221
Collective detector line
Collective detector line for areas at risk of explosion
Conventional detector line
Contact input
Control line with confirmation
Control line without confirmation
Reverse-polarity monitoring of control
Identical-polarity monitoring of control
Collective detector line
Collective detector line for areas at risk of explosion
Conventional detector line
Contact input
Control line with confirmation
Control line without confirmation
Reverse-polarity monitoring of control
Identical-polarity monitoring of control
Yes
No
Input/output 'I/O 2'
Collective detector line
Collective detector line for potentially
explosive atmospheres
Conventional detector line
No
Yes => alarm verification time = _____s
EOL22(Ex); obligatory in Ex area
Transzorb diode 20 V ±5 %, 1.5 kW pulse
power
009122_h_en_--
2016-05-04