Mounting In A Fire Control Panel - Siemens FDCIO223 Technical Manual

Mounting / Installation
5

Mounting in a fire control panel

5.2 Mounting in a fire control panel
54 | 72
Building Technologies
Fire Safety
To make sure that the LEDs on the module remain visible at all times, the cover
cap is transparent. Pick a suitable mounting position, ensuring that the LEDs will
remain visible at all times during operation.
When installing the module on a DIN rail, proceed as follows:
1. Insert the two mounting feet FDCM291 supplied into the side of the module.
2. Press the module's two mounting feet against a U-rail TS35 until the mounting
feet engage (see figure).
3. Connect cables to corresponding terminals (see connection diagram).
4. Secure cables on module with cable ties.
You will find more information on installing the module in chapter 'Connecting
input/output module [ 55]'.
1
FDCM291
Figure 13: Installing the module on a DIN rail TS35
2 3
TS35
4
009122_h_en_--
2016-05-04