HP FlexFabric 12900 Series Configuration Manual page 209

Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0
# Remove the link between Switch A and Switch B.
# Verify that Ten-GigabitEthernet 1/0/2 of Switch A does not connect to any neighboring devices.
[SwitchA] display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 1
The current number of CDP neighbors: 0
LLDP neighbor information last changed time: 0 days, 0 hours, 5 minutes, 20 seconds
Transmit interval
Fast transmit interval
Transmit credit max
Hold multiplier
Reinit delay
Trap interval
Fast start times
LLDP status information of port 1 [Ten-GigabitEthernet1/0/1]:
LLDP agent nearest-bridge:
Port status of LLDP
Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 5
LLDP agent nearest-nontpmr:
Port status of LLDP
Admin status
Trap flag
MED trap flag
Polling interval
Number of LLDP neighbors
Number of MED neighbors
Number of CDP neighbors
Number of sent optional TLV
Number of received unknown TLV : 0
: Disable
: No
: No
: 0s
: 0
: 0
: 0
: 16
: 30s
: 1s
: 5
: 4
: 2s
: 30s
: 4
: Enable
: RX_Only
: No
: No
: 0s
: 1
: 1
: 0
: 0
: Enable
: Disable
: No
: No
: 0s
: 0
: 0
: 0
: 1
201