Trunk Promiscuous Port Configuration Example - HP FlexFabric 12900 Series Configuration Manual

VLAN ID: 5
VLAN type: Static
Private VLAN type: Primary
Route interface: Not configured
Description: VLAN 0005
Name: VLAN 0005
Tagged
Untagged ports:
Ten-GigabitEthernet1/0/1
Ten-GigabitEthernet1/0/5
VLAN ID: 2
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged
Untagged ports:
Ten-GigabitEthernet1/0/2
VLAN ID: 3
VLAN type: Static
Private VLAN type: Secondary
Route interface: Not configured
Description: VLAN 0003
Name: VLAN 0003
Tagged
Untagged Ports:
Ten-GigabitEthernet1/0/1
The output shows that:
The promiscuous port Ten-GigabitEthernet 1/0/5 is an untagged member of primary VLAN 5 and
•
secondary VLANs 2 and 3.
The host port Ten-GigabitEthernet 1/0/2 is an untagged member of primary VLAN 5 and
•
secondary VLAN 2.
• The host port Ten-GigabitEthernet 1/0/1 is an untagged member of primary VLAN 5 and
secondary VLAN 3.

Trunk promiscuous port configuration example

Network requirements
As shown in
VLANs 5 and 10 are primary VLANs on Device B. The uplink port Ten-GigabitEthernet 1/0/1 on
•
Device B permits the packets from VLANs 5 and 10 to pass through tagged.
ports: None
ports: None
Ports: None
Figure 39, configure the private VLAN feature to meet the following requirements:
Ten-GigabitEthernet1/0/2
Ten-GigabitEthernet1/0/5
Ten-GigabitEthernet1/0/5
140