Specifications - Fostex PC100USB-HR2 Owner's Manual

Introduction
„ Features of PC100USB-HR2
„
• Volume controller which supports USB input.
• Can remotely control the volume of headphones and speaker systems.
• Compact and robust.
• Can be used as is - no additional cables are required.
• Can be used as an OS standard driver for Windows and Mac OS X.
• Supports maximum 96 kHz/24 bit (PCM) input using a playback application compatible with high
resolution sound or similar.
„ Accessories
„
Supplied accessories are listed below. Confirm that these accessories are present after purchase.
• USB cable (AB type/1 m) × 1
• RCA pin cable (1.5 m) × 2
• Owner's manual (this manual) × 1
„ Computer requirements
„
Computers that will be connected to the unit must have the following specifications.
• OS: Windows 7 or above, Mac OS X V10.6 or above
• USB: USB2.0 compatible

Specifications

[OUTPUT] (L/R)
terminals
[PHONES] terminal
[USB] terminal
Quantization bit rate
Power
Power consumption
Weight
External dimensions
Connector
Adapted load impedance
Standard output level
Connector
Adapted load impedance
Rated output
Connector
Supported sampling frequencies (kHz) 32, 44.1, 48, 88.2, 96
16/24 bit
USB bus power (5 V, 500 mA)
2.5 W maximum
Approx. 210 g (not including cables)
66 mm (Width) × 44 mm (Height) × 70 mm (Depth)
RCA pin jack
10 kΩ or more
+6 dBV (0 dBFS)
Φ3.5 stereo mini jack
32 Ω or more
30 mW + 30 mW
(32 Ω load, THD 0.5% or less)
USB type B connector
3