Table of Contents
Advertisement
I
Specifications
I
Inputs (x2)
Microphone impedance
Input impedance
Normal input level
Interna! microphone
LINE OUT L, R
Output load impedance
Normal output level
Tape output (TAPE OUT 1-4)
Output load impedance
Normal output level
Headphone output (PHONES)
Output load impedance
Maximum output
Recording tape
Record tracks
Noise reduction
Tape speed
Wow/flutter
Fast wind time
Pitch control
Recording time
Frequency response
Mixer
Recorder
Signal/noise ratio
Crosstalk
Erasure ratio
Heads
Rec/Play
Erase
Power Requirement
Weight
Dimensions (mm)
Accessory
: Less than 10 k£2
: 20 kfi or higher
: HIGH: -10 dBV
MID: -30 dBV
LOW: -50 dBV
: Condenser type x 1 (switchable)
: 10 kft or higher
:-10 dBV
: 10 k£2 or higher
:-10 dBV
: 8-50Q
: 20 mW
: C-60, C-90 (Type n/ High position) TDK SA, MAXELL XLH or equivalent
: 4 tracks, one direction (simultaneous recording of up to two tracks possible)
: Dolby B NR (internal) (switchable on/off)
: 9.5 cm/s
: ±0.17% (IEC/ANSI)
: 120 seconds (C-60 tape)
: ±
10
%
: 22.5 minutes (C-90 tape)
: 20 Hz-20 kHz
: 40 Hz-14 kHz
: 58 dB
: Higher than 50 dB (1 kHz)
: Higher than 70 dB (1 kHz)
: 4-track, 4-channel record/playback
: 4-track, 4-channel erase
: DC12V (12-16V), 11W (Fostex AC adaptor, AD-12 B)
: 1.5 kg (excludes AC adaptor)
: 355 (W) x 81 (H) x 188(D)
: AC adaptor (Model AD-12 B)
* Specifications and appearance are subject to change without notice for product improvement.
* Dolby Noise Reduction is manufactured under license from Dolby Laboratories Licensing Corporation.
* Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
29
Advertisement
Table of Contents
