System Connections - Kenwood KR-A5050 Instruction Manual

System connections
Make connections as shown below. When connecting the related system components, refer also to the instruction
manuals of the related components.
Do not plug in the power cord until all connections are completed.
. Connectionof audio components
FM DE-EMPHASIS/
CHANNEL SPACE switch
(Except for some areas)
AUDIO OUT
AUDIO OUT
AC voltage
selector switch
(Except for some
areas)
AC outlets
.
For Australia
'Not equipped
ToAC
outlet
For other countries
0
!OJ
(0 0)
AC
outlets for U.S.A and Canada
Refer to the "Setting
the speaker
IMPEDANCE
SELECTOR" section.
+
Refer to the
"System control
operation"
section.
Right Left
Speaker system B
Left Right
Speaker system A
OUTPUT
LINE OUT/PLAY
Cassette
deck 2
LINE IN/REC
~~Ib c:::::;2J]O
o1C::1J==== 0
Turntable
Cassette deck 1
LINE OUT/PLAY
B B
===
=000
===
OUTPUT
01 ...
===. .
LINE IN/REC
Notes on connection
. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
. When pluggingor unpluggingconnection cords, be sure to first unplugthe power cord from the ACoutlet. Plugging/ unpluggingconnection
cords
without disconnecting of the power cord can cause malfunctions or damage to the unit.
.
Do not connect a component with a power rating larger than that indicated at the rear of the unit.
I: O/n A~n~n "--'