Changing The Access Code - Siemens GIGASET SL55 Manual

System settings

Changing the access code

Access codes are the first few digits required when dialling another city (national) or
another country (international). The default settings for Germany are as follows:
0
00
In other countries, different access codes could be used. In this case you will need to
change this setting.
Otherwise some calls, e. g. callbacks from the call lists, will not be possible
¢
v w Ð
/
s s
/ National : 0
v v
/
s s
/ Change number
~ Í
s s
/ Save entry
Entering or changing the country code
On base station:
Phone numbers transferred from the GSM network always include the international
access code (country code), even for calls within a country (e. g. +49 for Germany,
+33 for France, +39 for Italy or +43 for Austria).
A special setting for the country code is therefore necessary if you have received a call
from the GSM network, saved the number to your directory or caller list and then want
to call the number from the directory or caller list using the ISDN network.
Default: Country code for relevant country (e. g. +49 in Germany).
¢
v w Ð
/
s s
/ Code: 49
v v
/
s s
/ Change number
~ Í
s s
/ Save entry
76
For connections to other towns (national)
For connections abroad (international)
¢ ¢
Base Settings
Select the type of access code, e. g. National : 0.
Open the submenu.
Select and confirm.
OK
Enter a new or changed access code and open
the menu.
Select and confirm.
OK
SX303isdn SX353isdn
¢ ¢
Base Settings
Select, e. g. 49 for Germany.
Open the submenu.
Select and confirm.
OK
Enter country code and open the menu.
Select and confirm.
OK
¢ ¢
ISDN settings
¢ ¢
ISDN settings
Lg.-dist. code
Lg.-dist. code