Emergency Numbers - Siemens GIGASET SL55 Manual

Security settings

Emergency numbers

By default, the country-specific emergency numbers are entered. These cannot be
edited or deleted. You may enter five emergency numbers of your own choice.
i
An emergency number may also be dialled from a handset with limited
authorisation (e. g. Internal only).
Setting up, editing, reading and deleting personal emergency numbers
¢
v w Ð
/
s s
/ <no entry>
Í
either ...
Change number
~
Í
Save entry
or ...
s s
/ Display number
or ...
s s
/ Delete number
If your telephone is connected to a PABX, you must enter the valid access
i
code (e. g. 0 ; see page 79) before the emergency number. This also
applies to preset emergency numbers, for which you need to re-enter an
alternative, e. g. "0110" and "0112".
Dialling emergency numbers
Requirement: The handset is blocked for external dialling (page 61).
c
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
EMERG.
... then
~
If the dialled number does not match the emergency number entered, the call is
rejected with the display "Number is not emergency no.".
62
¢ ¢
Base Settings
Select list entry, e. g. <no entry>.
Press the display key to open the submenu.
To set up or edit an emergency number:
Confirm.
OK
Enter new emergency number (up to 32 digits) or
edit existing emergency number. You can also copy
the number from the directory s
call list C.
Press the display key to open the submenu.
Confirm.
OK
To view an emergency number:
Select and confirm.
OK
To delete an emergency number:
Select and confirm.
OK
Press the Talk key.
Press the display key.
Dial emergency number.
Enter the emergency number.
¢ ¢
Security Emergency nos.
s or call-by-
/