Pre-Assigning The Call Diversion Destination - Cd (Call Deflection); Setting Up Automatic Call Diversion When A Handset Is Not Available - Siemens GIGASET SL55 Manual

System settings
Deleting external call diversion
¢
v w Ð
/
s s
/
v v
/
s s
/ Delete entry
Pre-assigning the call diversion destination – CD (Call Deflection)
This function pre-assigns the call diversion destination for incoming calls. This destina-
tion number is offered as a preset when setting up call diversion manually (page 28).
¢
v w Ð
/
~ Í
s s
/ Save entry

Setting up automatic call diversion when a handset is not available

If your handset is unavailable, e. g. it is out of the radio range of the base station, the
battery is flat or the handset is switched off, a call will be diverted to one of the external
phone numbers you specify (e. g. a mobile phone).
Requirements:
You have exclusively assigned the handset its own receive MSN (page 67).
◆
This MSN must not be assigned as the receive MSN for any other device, not even
the ISDN bus!
Call diversion can only be set up for one receive MSN on the base station.
◆
¢
v w Ð
/
s s
/ MSN1:
v v
/
~ Í
s s
/ Save entry
The set up call diversions for which automatic diversion is set are indicated in the
call diversion list.
72
¢ ¢
Base Ext. call forw.
Select call diversion, e. g. MSN1 to 22222.
Open the submenu.
Select and confirm.
OK
¢ ¢
Base Settings
Enter destination number and confirm.
Select and confirm.
OK
¢ ¢
Base Settings
Select call diversion, e. g. MSN1: Anna.
Open the submenu.
Enter destination number and confirm.
Select and confirm. Automatic call diversion is acti-
OK
vated (‰ = On).
¢ ¢
ISDN settings
¢ ¢
ISDN settings
Forward. dest.
Auto.forwarding