Siemens GIGASET SL55 Manual page 47

SMS (text messages)
i
On a PABX: The access code (outside line code) is automatically placed
before the phone number (page 79).
Copying a phone number from a text message to the directory
Your telephone can "identify" phone numbers in a received text message. It indicates
this by highlighting the sequence of digits (max. 32). If the text message contains mul-
tiple strings of digits, the first string of digits is highlighted. Scrolling through the text
message with s will automatically highlight the next string of digits etc.
Requirement: You have opened a text message in the incoming message list to read
(page 44).
Hello Sabine, here is my
new number
1234567890
Ó
Options
Ó
v v
/ <New Entry>
s s ~
/
§Save§
i
The phone number must be stored in the directory together with its area
code (access code) so that it can also be used for sending text messages.
Adding a text message sender's telephone number to the directory
Requirement: You have opened the incoming message list and selected a message
(page 43).
v v
/
s s
/ Copy to dir.
v v
/ <New Entry>
s s ~
/
§Save§
46
The string of digits is
highlighted in black.
Press the display key to create a new entry.
Select and confirm.
OK
SL55 only:
Then select the icon for Tel. ¾, Phone (Office) = or
Phone (Mobile) > and confirm with
Scroll to the line Name and enter the name
(for text entry see page 103).
Confirm. The entry is stored.
Open the menu.
Select and confirm.
OK
Select and confirm.
OK
SL55 only:
Then select the icon for Tel. ¾, Phone (Office) = or
Phone (Mobile) > and confirm with
Scroll to the line Name and enter the name
(for text entry see page 103).
Confirm. The entry is stored.
OK
.
OK
.