Specifying The Number Of Rings Before The Answering Machine Starts; Deactivating/Activating Spoken Date And Time - Siemens GIGASET SL55 Manual

¢ ¢
v w Ð
/
s s
/
v v
/
either ...
s s
/ Hide AM?
or ...
s s
/ Show AM?
When an activated answering machine is hidden it is deactivated. When it is set to show
again, the answering machine returns to the status it had before it was hidden.
Specifying the number of rings before the answering machine
starts
You can set when you want the answering machine to activate (after how many rings).
The options are: 1 ring tone, 2 ring tone, ..., or 9 ring tone. Instead of a set number of
rings, you can also set the charge saving setting Automatic 2/4 (factory default).
In this setting the answering machine activates automatically:
after 2 rings if there are new messages;
◆
after 4 rings if there are no new messages.
◆
Requirement: You have selected an answering machine (page 85).
s s
/ Settings
s s
/ No. of rings
s s
/ Automatic 2/4

Deactivating/activating spoken date and time

You can have the recording date and time (time stamp) announced when each mes-
sage/memo is played back (activated by default).
Requirement: You have selected an answering machine (page 85).
s s
/ Settings
Message/Memo
s s
/ Time stamp
¢ ¢
Base Settings
Select the internal numbers for the answering
machine (INT91, INT92 or INT93).
Open the submenu.
To hide an answering machine:
Select and confirm.
OK
To show an answering machine:
Select and confirm.
OK
Select and confirm.
OK
Select and confirm.
OK
Select the number of rings or Automatic 2/4 and
OK
confirm (‰ = set).
Select and confirm.
OK
Confirm.
OK
Select and confirm (‰ = activated).
OK
Setting up the answering machine
¢
Setup user Setup device
53