Withholding number identification
In some cases, you may not want the other party to be able to identify your phone
number. You can selectively withhold identification of your number for the next call or
permanently. With the permanent setting, the other subscriber will not be able to
see your number when you make an outgoing call. In addition, the subscriber making
the call will not be able to see the number they have actually reached (e. g. for call
diversion).
To withhold number identification for the next call only:
¢
¢
v
w
Ð
/
s
s
/
Temp.withhold
a
After the call, the setting is reset. The next person you call will once again
i
be able to identify your number. If you call the same dialled number again
from the last number redial list, the call will not be anonymous.
To suppress or permit identification of your phone number for all calls:
By default, Withhold no. is not activated.
¢
¢
v
w
Ð
/
s
s
/
Withhold no.
a
Handsfree mode
Activating/deactivating handsfree
~ d
d
As soon as you exit handsfree mode, you switch to "handset mode" and continue the
call on the handset.
If you wish to place the handset in the charger during a call you must
i
press and hold the handsfree key d as you do so. If the handsfree key d
does not light up, press the key again.
¢
Base
Call preparat.
Select and confirm (‰ = activated).
OK
Hold down (return to idle status).
¢
¢
Base
Settings
Select and confirm (‰ = activated).
OK
Hold down (return to idle status).
To activate while dialling:
Enter the phone number and press the handsfree
key (instead of the Talk key c).
To activate/deactivate during a call:
Press the handsfree key.
(Press again to deactivate.)
ISDN settings
Making calls
19