Scope Of Supply - Buderus Logano plus GB402 Installation And Maintenance Instructions Manual

2
3
1
Fig. 2 Logamatic BC10 basic controller - control elements
[1] "ON/OFF" switch
[2] Rotary selector for set DHW temperature
[3] "DHW heating" LED
[4] Status display
[5] Maximum boiler temperature rotary selector
[6] "DHW demand" LED
[7] Base plate with a slot for a programming unit, e.g. RC35
(behind the fascia)
[8] "Burner" (On/Off) LED
[9] Connection socket for diagnostic plug
[10] "Status display" key
[11] "Flue gas test" key
[12] "Reset" key (fault release button)
2.6

Scope of supply

The Logano plus GB402 is supplied as standard with a Logamatic BC10
basic controller and the MC10 control unit in 3 separate packages.
▶ Upon receipt, check that all packaging is in perfect condition.
▶ Check the delivery for completeness.
▶ Dispose of packaging in an environmentally responsible manner.
Packing unit Component
1 (boiler) Assembled boiler
(excluding casing)
Siphon
Foot bolts
Boiler flue connection
Label for gas type
conversion
Technical documentation
2 (separate) Casing
3 (separate) MC10 control unit
(includingBC10)
Tab. 2 Scope of supply
Logano plus GB402 – 6 720 804 428 (2012/09)
4 5
12 10 8
12 10
11 9
Packaging
1 shrink-wrap package
on a pallet
1 shrink-wrap package
1 shrink-wrap package
1 box
1 shrink-wrap package
1 shrink-wrap package
1 box
1 box
6
7
Logamatic BC10 basic controller ( Fig. 2).
The Logamatic BC10 basic controller provides control over the standard
functions of the heating system. It provides functions including the
following:
• Switching the heating system on/off
• Setting the DHW temperature and maximum boiler water temperature
in heating mode
• Status display
Figure 2 provides an overview of the control elements of the
Logamatic BC10 basic controller.
Programming units (such as the RC35*) offer many additional functions
for the convenient control of your heating system.
* available as an optional accessory
Accessories
Many individual accessories are available for this boiler.
For details regarding suitable accessories, see the Buderus web site or
contact your local Buderus office.
The following accessories are available from your local sales office:
• Safety valve or safety assembly
• Exhaust system
• Programming unit, e.g. RC35
• Ventilation air adaptor (accessory for balanced flue operation)
About the appliance 2
6720614021-003.1TD
7