Virtual Sd Memory Card Settings - Omron NY532-1500 Setup And User's Manual

4 Industrial PC Support Utility
4-8

Virtual SD Memory Card Settings

You can change the Virtual SD Memory Card settings for the Controller. The function is convenient to
change the Virtual SD Memory Card settings alone without using the Sysmac Studio.
You can make the change only when the Controller is in PROGRAM mode.
To display the screen, click the Virtual SD Memory Card Setting tab.
Item
Virtual SD Memory Card
Computer Name
IP Address
Shared Folder Name
User Name
Password
Update settings button
Check recognition button
*1. Characters that you can use range from 0 to 9, A to Z, a to z, and a single-byte symbol (-). The number of characters is 1 to 15 (with-
out NULL). Case insensitive.
*2. You cannot specify the following IP addresses.
IP addresses that start with 127 (decimal)
Class-D IP addresses (224.0.0.0 to 239.255.255.255)
Class-E IP addresses (240.0.0.0 to 255.255.255.255)
*3. Characters that you can use range from 0 to 9, A to Z, a to z, and a single-byte symbol (-). The number of characters is 1 to 32 (with-
out NULL). Case insensitive.
*4. Enter <.domain name>\< user name> to specify a domain. You can omit specifying a domain name when users with the same name
do not exist as a domain user and local user.
*5. Characters that you can use range from 0 to 9, A to Z, a to z, and single-byte symbols (`, !, #, $, ^, &, (, ), _, -, {, }, \, and '). The number
of characters is 1 to 274 (without NULL). Case insensitive.
*6. Characters that you can use range from 0 to 9, A to Z, a to z, and single-byte symbols (`,!, @, #, $, %, ^, &, *, (, ), _, -, +, =, {, }, [, ], \,
¦, :, ; ", ', <, >, ., ?, and /). The number of characters is 8 to 32 (without NULL). Case sensitive.
The current value set for the Controller is displayed on the right of each entry box.
4 - 18
Description
Specify whether to use the Virtual SD Memory Card function
or not. If you select Do not use, the Windows shared folder
is not recognized as a Virtual SD Memory Card.
Specify the Windows computer name.
Specify the IP address of the Windows internal port.
Specify the Windows shared folder name used as a Virtual
SD Memory Card.
Specify a shared name of the user who uses the shared fold-
*4
er as a Virtual SD Memory Card.
Set a password for the shared user who uses the shared
folder.
The values that are input are reflected in the Controller.
Check whether the Virtual SD Memory Card is recognized by
the Controller.
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)
Set value Initial value
Use. Do not use.
Do not use.
Blank
*1
Text string
192.168.254.2
*2
IPv4
VirtualSDCard
*3
Text string
Blank
*5
Text string
Blank
*6
Text string
--- ---
--- ---