Regulations And Standards; Conformance To Eu Directives; Software Licenses And Copyrights - Omron NY532-1500 Setup And User's Manual

Ny-series ipc machine controller industrial panel pc/industrial box pc
Hide thumbs Also See for NY532-1500:
Table of Contents

Advertisement

Regulations and Standards

Regulations and Standards

Conformance to EU Directives

Applicable Directives
• EMC Directive
Concepts
 EMC Directive
OMRON devices that comply with EU Directives also conform to the related EMC standards so that
they can be more easily built into other devices or the overall machine. The actual products have
been checked for conformity to EMC standards.*
Whether the products conform to the standards in the system used by the customer, however, must
be checked by the customer. EMC-related performance of the OMRON devices that comply with
EU Directives will vary depending on the configuration, wiring, and other conditions of the equip-
ment or control panel on which the OMRON devices are installed. The customer must, therefore,
perform the final check to confirm that devices and the overall machine conform to EMC standards.
*1. Applicable EMC (Electromagnetic Compatibility) standards are as follows:
EMS (Electromagnetic Susceptibility): EN 61131-2
EMI (Electromagnetic Interference): EN 61131-2
(Radiated emission: 10-m regulations)
 Conformance to EU Directives
The NY-series Controllers comply with EU Directives. To ensure that the machine or device in
which the NY-series Controller is used complies with EU Directives, the Controller must be installed
as follows:
• The NY-series Controller must be installed within a control panel.
• You must use the power supply in SELV specifications for the DC power supplies connected to
DC Power Supply Units and I/O Units.
• NY-series Controllers that comply with EU Directives also conform to the Common Emission
Standard (EN 61000-6-4). Radiated emission characteristics (10-m regulations) may vary de-
pending on the configuration of the control panel used, other devices connected to the control
panel, wiring, and other conditions.
You must therefore confirm that the overall machine or equipment complies with EC Directives.

Software Licenses and Copyrights

This product incorporates certain third party software. The license and copyright information associ-
ated with this software is available at http://www.fa.omron.co.jp/nj_info_e/.
16
NY-series Industrial Panel PC / Industrial Box PC Setup User's Manual (W568)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ny512-1500Ny512-1400Ny512-1300Ny532-1400Ny532-1300

Table of Contents