Step 4 : Connecting The Fm/Mw Antennas; Step 5: Connecting The Power Cord; Basic Connections - Philips HTS3115 User Manual

Basic Connections

fi x the claw
into the slot
Step 4: Connecting the FM/
MW antennas
A
Connect the supplied MW loop antenna
to the MW socket. Place the MW loop
antenna on a shelf, or attach it to a stand
or wall.
B
Connect the supplied FM antenna to the
FM socket. Extend the FM antenna and
fi x its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
16
Downloaded From TheatreSystem-Manual.com Manuals
FM antenna
MW
1
antenna
from the power outlet.
(continued)
2
Step 5: Connecting the
power cord
After everything is connected
properly, plug the AC power cord
into the power outlet.
The Eco Power LED on the DVD system
will light up. Never make or change any
connections with the power turned on.
Helpful Hints:
– Refer to the type plate at the rear or
bottom of the product for identifi cation and
supply ratings.
TV