Remote Control
Remote Control Buttons Functions
For TV Operation
POWER button
1.
Press to enter or exit the standby mode.
0~9 Number buttons
2.
Press to select numbers.
MTS button
3.
In TV mode, press to shift mode among
SAP, Mono and Stereo.
VOL +/ button
4.
Press to increase or decrease the volume.
MUTE button
5.
Press to turn on or off the speaker output.
SOURCE button
6.
Press to enter the sourceselecting menu,
then use the ▲▼ button to select mode:
TV, AV1 (Composite1), AV2 (Composite2),
AV3 (Component1), AV4 (Component2),
VGA, HDMI or DVD, press the Enter button
to enter the selected mode.
Direction buttons(▲▼◄►)
7.
In the setup menu, press the ▲▼ button to
select the desired items, press the ◄►
button to adjust.
ENTER button
8.
Press to confirm selection or exit the setup
in the setup menu.
SLEEP button
9.
Press to set the sleep time.
TV button
10.
Press to shift to TV mode.
SIGNAL button
11.
Press to display the ATSC signal status.
button
12.
Press number buttons to select channel
and then press the button to confirm and
go the selected channel.
+10/ button
13.
In TV mode, press the number buttons to
select channel first, then press this button
and add number button "0" or one number
from "1~5" to select analog or digital TV
program. Add "0" for analog TV program,
add one number from "1~5" for digital TV
program.
LAST button
14.
In TV mode, press to return to the channel
last viewed.
CH 5/6button
15.
In TV mode, press to select channels.
FREEZE button
16.
Press to freeze the current picture.
MENU button
17.
Press to enter or exit the system setup
menu.
EXIT button
18.
Press to exit system setup menu.
CC button
19.
Press to display among CC1, CC2, CC3,
CC4 or CC function OFF.
INFO. Button
20.
Press to display the current mode
information on the screen.
9