System Setup; Preparations; Setup Setting - Audiovox FPE2706DV Operating Instructions Manual

System Setup and Operation

Preparations

1. Connect the unit to the required power, antenna and video sources then press the POWER button
to turn on the unit.
2. Press the Input button to display the Input menu, then press the
by pressing the Enter button to activate the TV mode.
Selecting a Function for Set Up
Press the Menu button to activate the main
setup menu, as shown on the right:
Use the ▲ or ▼ button to select Setup then
press ◄ or ► button to enter the setup
menu. Use ▲ or ▼ button to highlight the
function which will be setup. Press the ◄ or
► button to return to the previous menu.
Press the Exit button to exit the setup
menu.
Tuning Band
Press the ▲ or ▼ button to select the Tuning Band then press the Enter button to cycle through the
available option: Air, Cable, Cable HRC, Cable IRC, Cable Auto.
DTV Signal
Press the ▲ or ▼ button to select DTV Signal then press the Enter button, the screen will display
the DTV Signal status, press the Enter button again to return to the previous menu.
Auto Ch Search
Press the ▲ or ▼ button to select the Auto
Ch Search then press the Enter button to
begin the auto searching/programming, see
the figure to the right :
After auto-searching/programming, the unit
will exit and automatically memorizing the
channels found. Upon exiting it will go to the
first found channel.
During searching, press the Exit button to
terminate the search process and exit
Setup.
- 23 -
or button to select TV. Follow