Case R Assembly; Prism Assembly - Sony PMW-EX1 Service Manual

2-2-14. Case R Assembly

1. Refer to Sections from 2-2-1 to 2-2-13 and
disassemble the unit up to "Case L Assem-
bly" removal.
2. Open the connector cover.
3. Remove the screw of a, and remove the
jack cover.
4. Remove the three screws of b, and remove
the case R assembly.
5. Reinstall the case R assembly by reversing
the steps of removal.

2-2-15. Prism Assembly

1. Refer to Sections from 2-2-1 to 2-2-14 and
disassemble the unit up to "Case R Assem-
bly" removal.
2. Remove the four screws, and remove the
prism assembly.
3. Reinstall the prism assembly by reversing the
steps of removal.
n
When replacing the prism assembly, attach
the BI board cushions (1) (Sony part No.: 3-
291-890-01) to the three positions of the BI
board.
PMW-EX1
Connector cover
P2 tapping
2 x 5
Cushion
BI board (1)
a
: P2 lock ace 2 x 4
b
: P2 lock ace 2 x 4
Case R assembly
b
b
a
Jack cover
P2 tapping
2 x 5
Prism assembly
2-15