Checking Status - Konftel 300IPx User Manual

SET TINGS

CHECKING STATUS

The status menu can be used for troubleshooting. Only the administrator is able to
change these settings. See "Installation and Administration of Konftel 300IPx" for an
explanation of the settings.
Account 1
To check account settings for SIP account 1.
Select > STATUS > ACCOUNT > ACCOUNT 1 (8,1,1).

This shows the status for:
- ACCOUNT NAME
- STATUS
- REGISTRAR
- USER
- USERNAME
- REALM
- PROXY
Account 2
To check account settings for SIP account 2.
> STATUS > ACCOUNT > ACCOUNT 2 (8,1,2).
Select

Shows the same information as the menu option above.
Transfer protocol
To check which protocol is used to transmit data packages over the network.
Select > STATUS > ACCOUNT > TRANSPORT (8,1,3).

Current protocol is displayed.
Network
To check which protocol is used to transmit data packages over the network.
> STATUS > NETWORK (8,2).
Select

This shows the status for:
- DHCP
- IP ADDRESS
- HOSTNAME
- DOMAIN
- SUBNET MASK
- GATEWAY
- DNS 1
- DNS 2
- VLAN
32