Konftel 300IPx User Manual page 51

USE WITH KONF TEL UNITE
The device name displayed is the name shown on the screen of that Konftel 300IPx
phone. (This text can be altered. See SCREEN and text settings in the administration
manual for the Konftel 300IPx).
When you select the Konftel 300IPx that you want to connect, a pairing code will be
displayed. Enter the code via the keypad on the conference phone and press OK. Pairing
will then start. When the devices are paired, the Unite connection symbol will be displayed
in both Konftel Unite and the Konftel 300IPx.
Konftel Unite and the Konftel 300IPx will remain paired while they are close to one
another and are being used. A connection breaks after 5 minutes of inactivity, i.e. when no
call is being held. The connection range is up to 20 metres, approximately, depending on
the setting. The connection breaks if this range is exceeded.
You will be asked to reconnect when Konftel Unite next comes within range of the Konftel
300IPx. One touch is all it takes to reconnect.
You can disconnect manually via the conference phone and the app.
Via the Konftel 300IPx:
Select: MENU > UNITE > disconnect from device > confirm with OK.

Via Konftel Unite:
Click on the Unite connection symbol in the upper left-hand corner of the screen and
select disconnect from the highlighted device.
Up to 100 mobile phones or tablets can be paired with a Konftel 300IPx. Note how-

ever: Only one user at a time can be actively connected to the conference phone!
The number of paired mobile devices is displayed under the status menu in the Konftel
300IPx.
Select: SETTINGS > UNITE > STATUS

The pairing can be deleted from either the mobile phone or conference phone.
Symbol for Unite
connection
49