Verify Transmitter Configuration - Emerson Rosemount 2051 Quick Start Manual

Quick Start Guide

6.0 Verify transmitter configuration

Operation can be verified in four locations:
At the device via the Local display (LCD display)

By using the Field Communicator

Via the Smart Wireless Gateway's integrated web interface

Via AMS Wireless Configurator

6.1 Verify transmitter configuration using LCD display
The LCD display will show the output values at the same rate as the wireless
update rate. Refer to the Rosemount 2051 Wireless
codes and other LCD display messages. Press and hold the Diagnostic button for
at least five seconds to display the TAG, Device ID, Network ID, Network Join Status,
and Device Status screens.
Searching for Network
N E T w K
S R C H N G
6.2 Verify transmitter configuration using Field Communicator
For HART Wireless transmitter communication, a Rosemount 2051 Wireless
Transmitter Device Descriptor is required. For connecting with a Field
Communicator, refer to
From the Home screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
10
Connected with Limited
Joining Network
n e t w k
N E G O T
Figure 1 on page 3.
3, 5
Reference Manual
Bandwidth
n e t w k
L I M - O P
May 2017
for error
Connected
n e t w k
O K