February 2019
6
Verify transmitter configuration
Operation can be verified in four locations:
•
At the device via the Local display (LCD display)
•
By using the Field Communicator
•
Via the Smart Wireless Gateway's integrated web interface
•
Via AMS Wireless Configurator
6.1
Verify transmitter configuration using LCD display
The LCD display will show the output values at the same rate as the wireless
update rate. Refer to the
error codes and other LCD display messages. Press and hold the Diagnostic
button for at least five seconds to display the TAG, Device ID, Network ID,
Network Join Status, and Device Status screens.
Searching for
Network
N E T w K
S R C H N G
6.2
Verify transmitter configuration using Field
Communicator
For HART Wireless transmitter communication, a Rosemount 2051 Wireless
Transmitter Device Descriptor is required. For connecting with a Field
Communicator, refer to
From the Home screen, enter the Fast Key sequence.
Device Dashboard Fast Keys
Table 6-1: Device Revision 1, DD Revision 1 Fast Keys
Function
Tag
Date
Descriptor
Quick Start Guide
Rosemount 2051 Wireless Reference Manual
Joining Network
n e t w k
N E G O T
Figure
1-1.
3, 5
Connected with
Limited Bandwidth
n e t w k
L I M - O P
Fast Keys
2, 1, 1, 1, 1
2, 1, 1, 1, 5
2, 1, 1, 1, 3
Quick Start Guide
for
Connected
n e t w k
O K
15