Connect The Power Module; Trim The Transmitter - Emerson Rosemount 2051 Quick Start Manual

Quick Start Guide
Figure 8. Housing Rotation
A. Housing rotation screw (

4.0 Connect the power module

1. Remove the power module cover.
2. Connect the green power module (see
Figure 9. Power Module
A. Power module

5.0 Trim the transmitter

Devices are calibrated by the factory. Once installed, it is recommended to
perform a zero trim on gage and differential pressure transmitters to eliminate
error due to mounting position or static pressure effects. A zero trim can be
performed using either a Field Communicator or configuration buttons.
For instructions using AMS Wireless Configurator, see the Rosemount 2051
Wireless Reference
Note
When performing a zero trim, ensure the equalization valve is open and all wet legs are filled
to the correct level.
8
A
5
/ -in. hex wrench required)
64
Manual.
Figure 9).
A
May 2017