Introduction; Safety Precautions; Caution And Warning Statements; Symbols - Fluke 435-II Service Manual

1.1 Introduction

Read these pages carefully before beginning to install and use the Analyzer.
The following paragraphs contain information, cautions and warnings which must be
followed to ensure safe operation and to keep the Analyzer in a safe condition.
Servicing described in this manual is to be done only by
qualified service personnel. To avoid electrical shock, do not
service the Analyzer unless you are qualified to do so.

1.2 Safety Precautions

For the correct and safe use of this Analyzer it is essential that both operating and service
personnel follow generally accepted safety procedures in addition to the safety
precautions specified in this manual. Specific warning and caution statements, where
they apply, will be found throughout the manual. Where necessary, the warning and
caution statements and/or symbols are marked on the Analyzer.

1.3 Caution and Warning Statements

Used to indicate correct operating or maintenance procedures
to prevent damage to or destruction of the equipment or other
property.
Calls attention to a potential danger that requires correct
procedures or practices to prevent personal injury.

1.4 Symbols

The following symbols are used on the Analyzer, in the Users Manual, in this Service
publication, or on spare parts for this Analyzer.
See explanation in Users Manual
Live voltage
Static sensitive components
(black/yellow).
Do no dispose of this product as
unsorted municipal waste. Go to
Fluke's website for recycling
information
Warning
Caution
Warning
DOUBLE INSULATION (Protection
Class)
Earth Ground
Recycling information
Conformité Européenne
1
Safety Instructions
1.1 Introduction
1-3