3.1 Introduction
This chapter contains an illustrated list of replaceable parts for the models 434-II, 435-II,
and 437-II Power Quality Analyzer Series II.
Parts are listed by assembly; alphabetized by item number or reference designator. Each
assembly is accompanied by an illustration showing the location of each part and its item
number or reference designator. The parts list gives the following information:
•
Description
•
Ordering code
Electrical components and in particular active components
such as IC's, transistors and diodes may be damaged by static
discharge.
Handling and servicing static sensitive components and
assemblies should be done only at a static free workstation by
qualified personnel.
3.2 How to Obtain Parts
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
•
Instrument model (for example Fluke 435-II), 12 digit instrument code (9444 ... ....),
and serial number (15500001). The items are printed on the type plate on the bottom
cover.
•
Ordering code
•
Description
•
Quantity
3.3 Service Centers
To locate an authorized service center, call Fluke using any of the phone numbers listed
below, or visit on the World Wide Web: www.fluke.com
USA and Canada: 1-888-99-FLUKE (1-888-993-5853)
Europe: +31-40-2675200
Anywhere in the world: +1-425-446-5500
Caution
List of Replaceable Parts
3.1 Introduction
3
3-3