Basic Operation For Wia Scanning - Ricoh SP 200S Operating Instructions Manual

5. Scanning from a Computer
1. Select Mode
Up to ten scan settings can be saved. The default value is applied when [Default] is selected.
2. Original Type
According to your original, select a setting from the list of options detailed below.
• [Standard] (Auto change to Full color, 200dpi × 200dpi)
• [Photo] (Auto change to Full color, 600dpi × 600dpi)
• [Filing] (Auto change to Text, 200dpi × 200dpi)
• [OCR] (Auto change to Text, 400dpi × 400dpi)
3. Original Scan Method
Specify the method to scan originals.
4. Original Size:
Select the scanning size. If you select [Custom Size...], enter the scanning size directly in the edit box.
5. Scan Mode:
Select from [Full Color], [Grayscale], [Photo], [Text], or [Text/Photo].
6. Resolution:
Select a resolution from the list.
If [Text], [Text/Photo], or [Photo] is selected in [Scan Mode:], the scan resolution cannot be set 1200 dpi ×
1200 dpi or higher.
7. Image Quality Adjustment
You can adjust the image quality. The scan settings that can be adjusted are as follow: Rotation, Brightness/
Contrast, Sharpness, Curves, Levels, Color Balance, and Hue/Saturation. When [Auto] is selected, the default
values will be applied to all settings. When [Manual] is selected, all settings can be adjusted as required.
• For details, see the TWAIN driver help.

Basic Operation for WIA Scanning

1. Place the original.
2. On the [Start] menu, click [Devices and Printers].
3. Right-click the icon of the printer model you want to use, and then click [Start scan].
4. Configure the scan settings as required, and then click [Scan].
5. Click [Import].
42