Brother PT-1090 Service Manual page 63

After completion of checking of all keys, the machine displays "Printing..." and
prints "OK" together with the head rank and destination (keypad version) as
shown below.
NOTE: If "Line Limit!" appears instead of "Printing..." it means that the width of the
tape cassette loaded is narrow. Replace the tape cassette with a 12-mm
one.
(Except the spec of GE)
Printing...
OK A
(Print)
1: US
(With head rank solder)
When printing finishes, the machine displays "PRN1" and enters the PRINT1
submode.
Cut the tape.
(Spec of GE)
Ausdruck...
(Without head rank solder)
III - 41