Brother PT-1090 Service Manual page 60

CASSETTE submode (3 key*)
With the "CLOCK 1" displayed, LCD check "CST" appear as shown below by
pressing the
Outline of CASSETTE submode
- Check the pressing of the five sensor switches (cassette sensor 2, 3, 7 and
6) and the cutter sensor.
- Press the cassette sensor 2, 3, 7, 6 and the cutter sensor in this order.
(Be careful in order of the cassette sensor 7 and 6.)
- Press the sensor by itself. If press the sensor with others, the NG is judged.
- The position of the cassette sensor is as shown below. Using the switch of the
2, 3, 7 and 6. Do not use other than them.
- If press the
With LCD check "CST", change the checking of the cassette sensor/cutter sensor
switch by pressing the
Change the "CST 2" by pressing/releasing the cassette sensor 2.
The machine displayed "CST 1 X" by pressing other than the cassette sensor 2
in the state of "CST 1".
Change the "CST 3" by pressing/releasing the cassette sensor 3.
The machine displayed "CST 1 X" by pressing other than the cassette sensor 3
in the state of "CST 2".
key or the 3 key.
7
1 2 3
key on this checking, the LCD check "CST" appear.
key. The machine displays "CST 1".
III - 38
6
5
4