Table of Contents
Advertisement
Figure 3 Installing the left server
Figure 4 Installing the right server
Cable management
Always follow good cable management practices when working inside the computer.
•
Keep cables away from major heat sources like the heatsink.
•
Do not jam cables on top of expansion cards or memory modules. Printed circuit cards are not
designed to withstand excessive pressure.
•
Keep cables clear of sliding or moveable parts to prevent cutting or crimping.
•
When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the
wires.
•
Some flat ribbon cables come pre-folded. Never change the folds on these cables.
•
Do not sharply bend any cable. A sharp bend can break the internal wires.
•
Never bend a SATA data cable tighter than a 30 mm (1.18 in) radius.
Removal and replacement procedures 31
Advertisement
Table of Contents
