HP ProLiant SL335s G7 Maintenance And Service Manual page 42

CAUTION: Use the process install tool to insert the processor into the socket. The processor and
system board spare part kits contain the processor install tool and instructions on how to use the
tool. It is important to follow the instructions to prevent damage to the pins in the processor socket.
To install a new processor:
1. Open the processor retaining latch and the processor socket retaining bracket.
Figure 18 Open the processor socket
IMPORTANT: Be sure the processor remains inside the processor installation tool.
2. If the processor has separated from the installation tool, carefully reinsert the processor in the tool.
Figure 19 Installing a processor in the installation tool
Removal and replacement procedures 42