HP ProLiant SL4540 Gen8 Quickspecs
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Server
  5. ProLiant SL4540 Gen8
  6. Quickspecs
HP ProLiant SL4540 Gen8 Quickspecs

HP ProLiant SL4540 Gen8 Quickspecs

Hp proliant sl4540 generation 8 (gen8) server
Hide thumbs Also See for ProLiant SL4540 Gen8:
Table of Contents

Advertisement

Quick Links

QuickSpecs
Overview
How are you going to scale out to petabytes with your current infrastructure?
Big data, largely unstructured such as messages, images, readings from sensors, and GPS signals from cell phones, are growing at an
exponential rate. The HP ProLiant SL4540 Gen8 Server solves the traditional structured database problems when dealing with big data.
Implementing a scale-out infrastructure will invariably result in challenges of data center capacity, spiraling energy costs,
infrastructure complexity and inefficiencies because today's siloed infrastructure is not optimized for scale-out server workloads
driven by big data. The SL4540 Gen8 Server is a server purpose-built for big data. A highly efficient converged design that delivers the
right combination of capacity and performance, in the least amount of space and at lower cost, with the reliability and manageability
you expect from HP ProLiant Gen8, the world's most intelligent servers.
SL4540 Gen8 1x60 Model
SL4540 Gen8 1x60 Model Front View:
1.
Hood Cover
2.
LFF 3.5" hard drives (60)
3.
SFF 2.5" hard drives on node (2)
4.
LFF hard drives connected to storage controller (Port 1i)
5.
LFF hard drives connected to storage controller (Port 2i)
6.
Hard drive backplane health LED
7.
Storage UID
8.
Hard drive LED display boards
9.
Node ejection button
10.
Node USB connectors (2)
11.
Node video connector (VGA port)
DA - 14406 Canada — Version 19 — June 10, 2014
HP ProLiant SL4540 Generation 8 (Gen8) Server
SL4540 Gen8 1x60 Model Rear View:
1.
Fan LED
2.
System fans
3.
I/O Module
4.
Management Module
5.
SL Advanced Power Manager Distribution Module (SL-
APMD)connector
6.
iLO connector
7.
Server Serial Port
8.
10Gb Ethernet SFP+ port
NOTE: Available only when 10G I/O module is ordered. 1G I/O
Module has 2x1Gb Ethernet ports only.
9.
10Gb Ethernet QSFP port
NOTE: Available only when 10G I/O module is ordered. 1G I/O
Module has 2x1Gb Ethernet ports only.
10.
2 X 1Gb Ethernet ports
11.
Low profile PCI express slot
NOTE: Available only when the optional HP SL454x Storage
Mezzanine to PCIe Enablement Kit is ordered
Page 1

Advertisement

Table of Contents
loading

Related Manuals for HP ProLiant SL4540 Gen8

Summary of Contents for HP ProLiant SL4540 Gen8

  • Page 1 Big data, largely unstructured such as messages, images, readings from sensors, and GPS signals from cell phones, are growing at an exponential rate. The HP ProLiant SL4540 Gen8 Server solves the traditional structured database problems when dealing with big data.
  • Page 2 Node power ON/Standby button and system power LED 2 X 1Gb Ethernet ports Node health LED Low profile PCI express slot NOTE: Available only when the optional HP SL454x Storage Mezzanine to PCIe Enablement Kit is ordered Node ejection button Power supplies...

  • Page 3: What's New

    Hard drive LED display boards 2 X 1Gb Ethernet ports Node video connector (VGA port) Low profile PCI express slot NOTE: Available only when the optional HP SL454x Storage Mezzanine to PCIe Enablement Kit is ordered Node USB connectors (2) Power supplies...

  • Page 4: Standard Features

    QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Standard Features NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated Models" section. Processor E5-2400 v2 Series One model of the following...
  • Page 5 Upgradeable to two processors NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2400 to E5-2400 v2. Please contact HP Technology Sales (http://www.hp.com/support), your local HP Re-seller, or reference the following Customer Advisory: ProLiant Servers-Instructions for Upgrading an HP ProLiant Gen8 Server from an Intel...
  • Page 6 *Indicates the number of physical electrical lanes running to the connector. NOTE: One PCIe 2.0 low profile expansion slot is enabled by HP Svr Storage Mezz to PCIe Option Kit 682632-B21 for adding one of the expansion options including an HP IO accelerator, networking options or external storage controller options.
  • Page 7 (SFF/2.5") hard drives on the server node itself. HP SL4500 H220 Host Bus Adapter NOTE: HP SL4500 H220 HBA is located in the I/O Module, which is located at the rear of the SL4540 chassis and controls the large form factor (LFF/ 3.5") hard drives.
  • Page 8 One 10GbE/40GbIB QSFP connector NOTE: 10 Gb Ethernet on the QSFP port requires the use of the QSFP to SFP+ adapter 655874-B21 NOTE: IB supported with addition of HP IB Enablement Kit 2 front (external) Serial 1 rear (external on I/O Module)
  • Page 9 6' Highline (IEC-IEC) power cord ships standard NOTE: HP ProLiant SL servers are primarily connected to PDU's in data center racks so they ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant SL server using a 110V receptacle (NEMA-15), the NEMA power cord must be ordered separately.

  • Page 10: Virtualization Software

    NOTE: Only 64-bit versions of these operating systems are supported. NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server including how to purchase from HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport...
  • Page 11 BladeSystem enclosure components (Onboard Administrator and Virtual Connect). This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdepencies, when determining the correct updates and order of update deployment.

  • Page 12: Warranty

    Advanced supports directory services integration Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.

  • Page 13: Optional Features

    For more information, see http://www.hp.com/go/insightcontrol. HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, see: http://www.hp.com/services/insight.
  • Page 14 HP Insight Online HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP support information personalized to your IT environment. Insight Online can automatically display devices remotely monitored by HP Insight Remote Support. With Insight Online's easy navigation you can efficiently track your IT support contracts and device status from anywhere and at anytime.

  • Page 15: Service And Support

    HP Installation and Startup for Insight Control Software / HP SIM Provides for the deployment and basic configuration of HP Insight Control or HP SIM (Systems Insight Manager) on HP ProLiant ML and DL series servers or HP BladeSystem servers or HP ProLiant SL servers http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf For a Hyperscale Environment, Datacenter Care is our most flexible and comprehensive support offering.
  • Page 16 The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the defective media retention service feature option.

  • Page 17: Pre-Configured Models

    Memory 32GB (8 x 4GB) per node Network Controller (2) 1Gb Ethernet Ports per node Storage Controller (1) HP SL4500 H220 Host Bus Adapter per node Hard Drive None ship standard Expansion Slot (1) available mezzanine slot per node Management...

  • Page 18: Configuration Information - Factory Integrated Models

    NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
  • Page 19 NOTE: Please choose memory options for the first processor of each server node. Up to 6 DDR3 DIMM slots are dedicated per processor socket. NOTE: HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server. HP SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for DA - 14406 Canada —...
  • Page 20 NOTE: A maximum of 12 DDR3 based memory slots are available on the node tray. HP I/O Module NOTE: At least one I/O module must be selected per node. The HP ProLiant SL454x 1G FIO Module Kit supports two (2) embedded 1Gb NICs. The HP SL454x 10G FIO Input Output Module Kit supports two (2) embedded 1Gb NICs and two (2) embedded 10Gb NICs with an optional InfiniBand upgrade.
  • Page 21 682632-B21 NOTE: Needed to enable Low Profile PCIe Slot in the I/O module. Required for ordering any additional PCI Express cards for adding one of the expansion options such as HP IO accelerator, networking options or external storage controller options...

  • Page 22: Core Options

    HP ProLiant SL4540 Generation 8 (Gen8) Server Core Options NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.
  • Page 23 HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_ca/14225_ca.html NOTE: HP certified SmartMemory must be used to guarantee full 1333MHz speeds. NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1600, 1333MHz or 1066MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
  • Page 24 6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives HP 800GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State 718189-B21 Drive HP 600GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State...
  • Page 25 HP Ethernet 10Gb 2-port 561T Adapter 716591-B21 NOTE: Need to order HP SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile PCIe slot. NOTE: These are additional expansion options and only one may be selected per server node.
  • Page 26 HP BladeSystem c-Class 10Gb Long Range Small Form-Factor Pluggable Option 455886-B21 HP BLc VC 1GB SFP RJ-45 Module 453156-001 HP BLc Virtual Connect 1Gb RJ-45 Small Form Factor Pluggable Option Kit 453154-B21 HP BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option Kit 453151-B21...
  • Page 27 NOTE: FDR and FDR-10 not supported. HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP Power Advisor is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.

  • Page 28: Additional Options

    HP ProLiant SL4540 Generation 8 (Gen8) Server Additional Options HP SL Advanced Power The SL Advanced Power Manager is an optional rack level solution for the HP ProLiant SL4540 and SL4545 which enables server-level DC (or hardware) power on and off and Manager server-level monitoring.
  • Page 29 HP 785GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers 673644-B21 NOTE: Need to order HP SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile PCIe slot. NOTE: These are additional expansion options and only one may be selected per server node.
  • Page 30 Optional Upgrades HP 12in Super Capacity Option for Smart Array 668943-B21 NOTE: The HP 12in Super Cap is a required option to implement a HP Smart Array Controller with Flash. HP 1GB P-series Smart Array Flash Backed Write Cache 631679-B21...
  • Page 31 (HBA 222) HP Power Cords NOTE: HP ProLiant servers ships with an IEC-IEC power cord used for rack mounting with Power Distribution Units (PDUs). HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord A0K03A HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord A0K04A HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord...
  • Page 32 NOTE: For additional information on sizing your server, please reference: http://www.upssizer.com. NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units.
  • Page 33 H3X08A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/14557_ca/14557_ca.html54 NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower HP Remote Monitoring HP Remote Monitored Power Distribution Unit: 1U Version Power Distribution Units HP 2.8kVA 120 Volt L5-30 Input (12xNEMA 5-20R)NA/JP Monitored PDU...
  • Page 34 NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13650_ca/13650_ca.html NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP PDUs and additional information please visit: www.hp.com/go/rackandpower. HP Rack Series HP Intelligent Rack Series...
  • Page 35 Proactive Service HP 3 year 4 hour 13x5 SL454X Gen8 Tray 1x Node Hardware Support U7K44E HP 3 year 4 hour 13x5 with Defective Media Retension SL454X Gen8 Tray 1x Node U7K45E Hardware Support HP 3 year 4 hour 24x7 SL454X Gen8 Tray 1x Node Hardware Support...
  • Page 36 HP 3 year 4 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Node Proactive U7K51E Service HP 3 year 24 hour 24x7 Call to Repair SL454X Gen8 Tray 1x Node Hardware Support U7K54E HP 3 year 24 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Node...
  • Page 37 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Additional Options Cloudera Ent Basic Ed 1yr 8x5 E-LTU G7M28AAE Cloudera EDH Ed 1yr 24x7 Phys Lic G7M29A Cloudera EDH Ed 1yr 24x7 E-LTU G7M29AAE Cloudera EDH Ed 1yr 8x5 Phys Lic...
  • Page 38 The maximum memory capacity is a function of the memory type and number of installed processors. HP memory from previous generation servers is not qualified on the SL4540 Gen8 Server. Certain HP SmartMemory features such as memory authentication and enhanced performance may not be supported.
  • Page 39 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Memory DIMM Type Registered DIMMS for E5-2400 v2 Series Processors (RDIMMs) DIMM Rank Single Rank (1R) Dual Rank (2R) DIMM Capacity 16GB DIMM Native Speed (MHz) 1600 1600 1600 1600 Voltage SLOTS THAT CAN BE POPULATED...
  • Page 40 HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_ca/14225_ca.html NOTE: HP certified SmartMemory must be used to guarantee full 1333MHz speeds. NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, 1333MHz or 1066MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
  • Page 41 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Storage 1x60 Model 2 x SFF SATA/SATA SDD Hot Plug Hard Drive Bays 1-30 30 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays Controller Port 1i 1-30 30 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays...
  • Page 42 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Storage 2x25 Model 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for server node 1 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for server node 2...
  • Page 43 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Storage 3x15 Model 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for server node 1 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for server node 2...

  • Page 44: Technical Specifications

    For 750 W Power Supply: 750 W (at 100 to 120 VAC), 750 W (at 200 to 240 VAC) Power Specifications To review typical system power ratings use the HP Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor.
  • Page 45 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Technical Specifications fault or above 86°F (30°C). Non-operating -22° to 140° F (-30° to 60° C) Maximum rate of change is 36°F/hr (20°C/hr). Relative Humidity Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
  • Page 46 Connector QSFP - IB SFP+ - 10Gb/s Ethernet. Cable Support IB: HP copper and optical IB NOTE: IB supported with addition of HP IB cables. Enablement Kit 10Gb/s: HP copper and optical SFP+ cables DA - 14406 Canada — Version 19 — June 10, 2014...
  • Page 47 Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
  • Page 48 QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server Technical Specifications DA - 14406 Canada — Version 19 — June 10, 2014 Page 48...

Table of Contents