QuickSpecs
Overview
The HP ProLiant SL250s Gen8 Server series with HP ProActive Insight architecture delivers even greater levels of configurability for high
performance and scale-out deployments, to help lower total cost of ownership.
Up to four HP ProLiant SL250s Gen8 nodes, in a 4U modular form factor, fit into the HP s6500 scalable system. In addition, each node
can support up to three GPUs or four additional 2.5-inch hard drives.
The SL250s Gen8 Server series includes the exclusive HP SmartMemory and delivers a 25% increase in memory bandwidth to improve
performance for certain applications.
Delivering on the promise of server lifecycle automation, the SL250s Gen8 features the exclusive HP Active Health System that provides
continuous, proactive, monitoring for over 1600 system parameters with zero impact to application performance.
NOTE: The 2U Open View image below shows two SL250s side by side to denote the left and right trays. Each unit is a 2U, half-width
form factor.
2U Open View:
1.
Rear dual GPU placement. This location is also for the optional
SFF 2.5" hard drive kit to enable four (4) SFF HDD's in place of
the GPUs.
2.
Single GPU riser mounts and underneath is Support for two
Intel® Xeon® E5-2600 sequence processors and 16 memory
slots. This location is also for the optional SFF 2.5" hard drive
kit to enable four (4) SFF HDD's in place of the GPUs
3.
FlexibleLOM networking option slot
What's New
Updating supported options
DA - 14232 North America — Version 29 — December 16, 2013
HP ProLiant SL250s Generation 8 (Gen8)
2U Front View:
1.
PCIe Expansion slot
2.
Four Hot-Plug Drive Slots
3.
Dedicated iLO4 Management Port
4.
(1) 1GbE Ports
5.
(1) 1GbE Ports
6.
Power Button
7.
Health LED
8.
UID LED
9.
Serial Port
10.
SUV (Serial/USB/Video)
Page 1