Instrument Settings Menu - Fluke 6270A Operator's Manual

Instrument Settings Menu

To set user preferences, from the Instrument Setup menu, touch the Instrument
Settings tab. The Instrument Settings menu is shown.
The sections of the Instrument Settings menu are explained in Table 5.
A password is required to change the Date/Time and Security
parameters. See Security below for information about how to change
the default password.
Tab
Use this screen to change the UI language. Touch the Language tab to select
English, Italian, Spanish, Russian, Portuguese, Simplified Chinese, German,
Language Japanese, French, Korean, Czech, or Slovak. From Main menu, hold the
Unlock button for 3 seconds and the system goes to the Language Selection
menu.
The date and time are set from this menu. Use MM/DD/YYYY, DD/MM/YYYY, or
YYYY-MM-DD (M= Month, D=Date, Y=Year). To change the format of the date,
touch the Format tab, select the format and touch Exit.
Date/Time
To change the date and time, touch the parameter to change (Month, Day, Year)
and use the keypad on the right to key in the new value. Push ENTER to store the
value(s).
Use this menu to adjust aspects of the Display. Touch the Display tab to get to the
Brightness and Screen Timeout parameters. For display brightness, touch
Brightness tab and use the keypad on the front of the Product to adjust the
Display
percentage. The screen can also be set to turn off (timeout) after a certain amount
of time. Touch the arrow on the Screen Timeout tab and select 1, 5, 10, 15, or 30
minutes. Never can also be selected.
Specify a decimal separator for your region, either "." or ",". To change the
Decimal
selected separator, touch the Decimal tab.
The Product can save up to 5 screen captures. When the Product is connected to
a computer using a USB cable, the Product shows as a disk drive on the
Screen computer. Screen captures can be copied from the Product to the computer.
Capture Touch the Screen Capture tab to enter the menu. From this menu, existing
screens can be captured with the Next button or deleted with the Delete or Delete
All buttons.
Note
Table 5. Instrument Settings Menu
Description
Pressure Controller/Calibrator
Controller Settings (Setup Menu)
23