Panasonic AG-HMC80P Operating Instructions Manual page 92

Screen displays (continued)
*
1 Time code display 1
Each time you press the COUNTER button, the
display switches over to the following data (or
no indication).
COUNTER:
Counter value
CLIP:
Counter value for each recorded clip
Displayed when the REC COUNTER item in
the setting menu SW&DISP SETUP screen
is set to CLIP.
TC:
Time code value.
When the time code value could not be read
correctly from the SD Memory Card, [TC ] is
displayed.
UB:
User information
When user information could not be read
correctly from the SD Memory Card, [UB ] is
displayed.
2 Media capacity display
CAMERA mode:
Displays the remaining recording time for the
frame rate set with the REC FORMAT item in
the setting menu RECORD SETUP screen.
PHOTO mode:
Displays the number of photos that can
recorded under the current quality setting
for the QUALITY item in the setting menu
PICTURE screen.
3 Recording function display
: Displayed when PREREC MODE is set
to ON. (Pages 11, 60)
: Displayed when INTERVAL REC is
enabled. (Pages 13, 62)
: Displayed when REPEAT PLAY is set to
ON. (Pages 49, 85)
4 AUTO/MANUAL switch operation display
This display appears when AUTO/MANUAL
switch is switched to AUTO.
: Auto shooting
A : Auto face detection shooting
ON
*
Will not be output to external devices.
1
92
5 Operation status display
●
: Recording
: (Red) Transitioning to recording
standby mode
(Green) Recording standby mode
: Playback or REC CHECK in
progress
: (White) Playback paused
( ): Frame-by-frame playback
(Frame-by-frame reverse
playback)
( ): Fast forward/fast playback
(Rewind/fast reverse playback)
( ): Last clip/first clip (During pause
(AVCHD mode only))
Self-portrait recording display
No display: Cannot record (no card, etc.)
●
: Recording in progress, transitioning to
recording standby mode
: (Green) Recording standby mode
: Warning display
6 Self-timer display
Displayed when the SELF TIMER item in the
setting menu PICTURE screen is set.
7 Shutter chance display (Page 31)