Synchro Scan - Panasonic AG-HMC80P Operating Instructions Manual

Synchro scan

Adjust the shutter speed to match the frequency of
the television or computer monitor to minimize the
horizontal noise that appears when shooting such
subjects.
• If SYNC is displayed in grey, it cannot be used
with the current recording format. This function
will only operate for preset values for each
recording format.
Valid setting values will appear to the right of the
adjustment value.
48 0/60i:
1/60.0 to 1/250.0 sec
48 0/30P:
1/30.0 to 1/250.0 sec
48 0/24P:
1/24.0 to 1/250.0 sec
1
Set the AUTO/MANUAL switch to MANUAL
to select manual mode. (Page 54)
2
Press the FUNC/EXEC button to display the
Function Menu.
3
Select SYNC with the left or right button of
the cursor button, and press the ENTER
button.
• The shutter speed appears at the left of the
screen.
4
Adjust the shutter speed with the up or
down button of the cursor button, and press
the ENTER button.
5
Press the FUNC/EXEC button and close the
Function Menu.
• To activate a synchro scan setting, press the
SPEED SEL –/+ button while set to SHUTTER
ON mode, and switch to SYNCRO SCAN
(Page 66).
• You can change the progressive mode in
the setup menu with REC FORMAT in the
RECORD SETUP screen. (Page 103)
67